SUNSHIELD | DESCRIPTION  SUNSHIELD is a one-part emulsion that combines high performance acrylics in a water-borne formulation. The coating combines four different ceramics that provide both heat reflectivity and insulative properties.
SUNSHIELD can be used as a topcoat over SUPER BASE/HS or as a one-coating system. The coating is flexible and resistant to mold and mildew.
SUNSHIELD can be applied over most firmly bonded paints. In most cases, no white metal or near-white metal blast is required to prepare the substrate. Allow the first coat to dry before applying the second.
- Solids: By volume 46%
- Dry Time: One hour to touch / overcoat window begins a four hours at 70F. degrees or longer
- Fully cures in 21 days
- Lead and Chromate free
- Cures by heat and evaporation
- Weight: 11.27 lbs. per gallon
- Vehicle Type: Water-borne
- Shelf Life: up to 3 years unopened under appropriate stor age conditions
- VOC Level: 67 grams per liter
- Viscosity: 105-110 KU
- R Equivalency: 17, facing radi ant heat
- Tinting: Can be tinted any light color with a minimum of 250 gallons
FIELD TESTING has proven:
- The coating provides a watertight barrier
- The coating can withstand large temperature variances without peeling, cracking or loss of adhe sion
- The coating is resistant to mold and mildew
- The coating was designed to be flexible and elongate to move with substrate, and to withstand the rigors of expansion and con traction
- The ceramics contained have sound dampening qualities
TYPICAL USES: - As a one-coat system on most types of roofs.
- As a topcoat over SUPER BASE/HS on shingled roofs.
- As insulation protection on side walls
APPLICATION METHODS: SUNSHIELD can be applied to metal, wood, concrete, fiberglass and many other porous substrates. For specific instruction on surface preparation, mixing and application, please refer to the SPI’s application instructions for SUNSHIELD.
TEST AND CERTIFICATIONS:  SAFETY PRECAUTIONS: Do not use this products without first taking all appropriate safety measures to prevent property damage and injuries. These measures may include, without limitation: proper ventilation, use of proper lamps, wearing of protective clothing and masks, tenting, and proper separation of application areas.
KEEP OUT OF REACH OF CHILDREN Minimum Spread Rate: Film Thickness: All substrates – 16 mils wet/7.4 mils dry
Note: If application is by brush or roller, two coats may be required to achieve to the desired thickness Apply at 100 sq.ft./gallon (16 mils wet/7.4 mils dry) |
|
