 |
Superterm® |
 In conventional insulation, the measurement of resistance is based upon the transference of heat through an insulation material. This measurement is known as ( R ). Insulation materials that use this guide of resistance are a means to temper heat, but also require thickness. The thicker the material, the slower the time will be to absorb and eventually transfer the heat from the external source into the insulated environment. These materials allow a 100% loading of surface heat facing the heat source.
|
|
RUST GRIP® |
 One-coat, patented encapsulation-interior and exterior-Rust Grip® is the one surface protection coating that also acts as a full containment covering. This moisture-cured polyurethane coating has been used successfully in the harshest environments; chemical fields, oil fields, oil rigs, and in areas that demand resistance to the corrosive effects of day-to-day exposure. Rust Grip® is tested to encapsulate toxic elements such as existing lead-based paint, asbestos and other bio-hazard materials.
|
|
HPC™ COATING |
 HPC™ Coating is a combination of high performance, specially designed, high-temperature ceramics and resins in a water-borne, nonflammable formula, it is used as an insulation coating to reduce surface heat on pipes carrying hot liquid, gas or steam.
HPC™ Coating is designed to coat surfaces that sustain temperatures between 3500F (1760C) and 7000F (3700C).
|
|
HSC™ COATING |
 Like HPC™ Coating, HSC™ Coating is a combination of high performance, specially designed, high-temperature ceramics and resins in a water-borne, nonflammable formula. HSC™ Coating is designed to be applied by brush for applications requiring smoother surfaces over small diameters.
HSC™ Coating is designed to coat surfaces that sustain temperatures between 1500F (660C) and 3500F (1760C).
|
|
ENAMO GRIP® |
 Blended as two-part polyurethane enamel, Enamo Grip® forms a hard and durable coating film that resist water, humidity, staining, acids solvents and chemicals. Enamo Grip® excels as a premier finish sealer for walls, floors and ceilings-over a variety of materials, including: masonry, wood, metal, concrete and other porous surfaces.
Enamo Grip® can be applied by airless spray, brush or roller, and finishes with an even, self-leveling glossy surface. No brush marks will show in the finished surface.
|
|
MOIST METAL GRIP® |
 Moist Metal Grip® is a two-part epoxy coating designed for application on dry or wet surfaces for protection against corrosion and chemical. It is applied brush or roller even while the surface is wet. Moist Metal Grip® adheres to metal as well as concrete and wood surfaces. Epoxotherm can be applied as the top coat to stop condensation.
|
|
LINING KOTE® |
 Lining Kote® is a two-part, pigmented, high-molecular epoxy coating, which produces a flexible, durable, protective film coat. Lining Kote® is designed to withstand the toughest acid, chemical or solvent environments. It is ideal for petrochemical plants, chemical storage, ballast tanks and more. Lining Kote® has outstanding adhesion and extended durability and will withstand direct impact.
Lining Kote® is resistant to water, humidity, and chemical solutions and can withstand temperatures up to 3500F (1760C).
|
|
OMEGA FIRE™ (SP2001F) |
 Omega Fire™ is a blend of eight ceramics, combined together to create a heat block (fire wall) that resists heat migration and fire. Omega Fire™ is a water-based coating that dries tough and is designed to withstand temperatures of 20000F without collapse of failure.
|
|
OMEGASECT™ |
 Omegasect™ is a water-based, acrylic insecticide formulations. Omegasect™ dries to a durable, washable finish that is odorless, nonflammable, and low in toxicity. It can be used on exterior or interior surfaces.
|
|
EPOXOTHERM |
 Epoxotherm is a two-part epoxy coating that produces a flexible, hard coating film that will have insulation value equal to or greater than four to six inches of batt insulation at 80 dry mils. This epoxy coating was formulated with three different ceramic compounds to block heat absorption from radiant heat surfaces.
|
|
SUPER BASE HS |
 Super Base HS is a one part, water-based, high performance elastomeric acrylic coating designed for application on roofs or wall structures to seal cracks and to perform as an excellent base coating.
|
|
TOTAL SEAL |
 |
Total Seal is a two-part epoxy coating designed for application on wet or dry surfaces and to seal concrete and masonry. Total Seal provides excellent solvent and chemical resistance. Use it to coat concrete floors or concrete block walls.
|
|
AQUA POX |
Aqua Pox is a two-part, amine-cured, epoxy coating that will demonstrate the physical properties of solvent-borne epoxies but in a water-reducible formula.
Aqua Pox display excellent adhesion properties and produces a surface coating/film that will exhibit outstanding resistance to water, chemicals, acids, solvents, oils and gasoline. It is designed for the protection of steel and concrete surfaces.
|
|
SP SUPER CLEANER |
SP Super Cleaner is a high performance, full strength cleaning agent that combines exceptional cleaning strength, safety and quick, total evaporation.
Substitute SP Super Cleaner for many of the hazardous solvents that are more commonly used in industrial applications, particularly where high-solvency is a prime consideration. Use SP Super Cleaner on parts, washers, ultrasonic cleaners or flow by wiping, coarse spraying, or by dipping.
|
|
SUNSHIELD |
 SUNSHIELD is a one-part emulsion that combines high performance acrylics in a water-borne formulation. The coating combines four different ceramics that provide both heat reflectivity and insulative properties.
SUNSHIELD can be used as a topcoat over SUPER BASE/HS or as a one-coating system. The coating is flexible and resistant to mold and mildew.
|
 |
